Nginx 0.6.31 + PHP 5.2.6（FastCGI）搭建胜过Web服务器（一）
论坛链接- Nginx 0.6.31 + PHP 5.2.6（FastCGI）搭建胜过Web服务器（一）
- 发布时间：2008-08-29 21:26:47 浏览数：7616 发布者：lbsong 设置字体【大 中 小】
Nginx ("engine x") 是一个高性能的 HTTP 和反向代理服务器，也是一个 IMAP/POP3/SMTP 代理服务器。 Nginx 是由 Igor Sysoev 为俄罗斯访问量第二的 Rambler.ru 站点开发的，它已经在该站点运行超过两年半了。Igor 将源代码以类BSD许可证的形式发布。
Nginx 的中文维基：http://wiki.codemongers.com/NginxChs
在高并发连接的情况下，Nginx是Apache服务器不错的替代品。Nginx同时也可以作为7层负载均衡服务器来使用。根据我的测试结果，Nginx 0.6.31 + PHP 5.2.6 (FastCGI) 可以承受3万以上的并发连接数，相当于同等环境下Apache的10倍。
根据我的经验，4GB内存的服务器+Apache（prefork模式）一般只能处理3000个并发连接，因为它们将占用3GB以上的内存，还得为系统预留1GB的内存。我曾经就有两台Apache服务器，因为在配置文件中设置的MaxClients为4000，当Apache并发连接数达到3800 时，导致服务器内存和Swap空间用满而崩溃。
而这台 Nginx 0.6.31 + PHP 5.2.6 (FastCGI) 服务器在3万并发连接下，开启的10个Nginx进程消耗150M内存（15M*10=150M），开启的64个php-cgi进程消耗1280M内存（20M*64=1280M），加上系统自身消耗的内存，总共消耗不到2GB内存。如果服务器内存较小，完全可以只开启25个php-cgi进程，这样 php-cgi消耗的总内存数才500M。
在3万并发连接下，访问Nginx 0.6.31 + PHP 5.2.6 (FastCGI) 服务器的PHP程序，仍然速度飞快。下图为Nginx的状态监控页面，显示的活动连接数为28457（关于Nginx的监控页配置，会在本文接下来所给出的Nginx配置文件中写明）：
图片 alt=点击在新窗口中浏览此图片 src="http://www.phpv.net/uploadfile/month_200806/local_kL6XBv8Yq1.png" border=0>
我生产环境下的两台Nginx + PHP5（FastCGI）服务器，跑多个一般复杂的纯PHP动态程序，单台Nginx + PHP5（FastCGI）服务器跑PHP动态程序的处理能力已经超过“700次请求/秒”，相当于每天可以承受6000万（700*60*60*24=60480000）的访问量（更多信息见此），而服务器的系统负载也不算高：
--------------------------------------------------------------------------------
安装步骤：
（系统要求：Linux 2.6+ 内核，本文中的Linux操作系统为CentOS 5.1，另在RedHat AS4上也安装成功）
一、获取相关开源程序：
1、利用CentOS Linux系统自带的yum命令安装、升级所需的程序库（RedHat等其他Linux发行版可从安装光盘中找到这些程序库的RPM包，进行安装）：
sudo -s
LANG=C
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libpng libpng-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel
2、下载程序源码包：
本文中提到的所有开源软件为截止到2008年6月5日的最新稳定版。
mkdir -p /data0/software
cd /data0/software
wget http://sysoev.ru/nginx/nginx-0.6.31.tar.gz
wget http://www.php.net/get/php-5.2.6.tar.gz/from/this/mirror
wget http://php-fpm.anight.org/downlo ... 6-fpm-0.5.8.diff.gz
wget http://dev.mysql.com/get/Downloa ... //mysql.ntu.edu.tw/
wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.12.tar.gz
wget "http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz?modtime=1171868460&big_mirror=0"
wget "http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.7.tar.gz?modtime=1194463373&big_mirror=0"
wget http://pecl.php.net/get/memcache-2.2.3.tgz
wget "http://downloads.sourceforge.net/mhash/mhash-0.9.9.tar.gz?modtime=1175740843&big_mirror=0"
wget ftp://ftp.csx.cam.ac.uk/pub/soft ... cre/pcre-7.7.tar.gz
wget http://xcache.lighttpd.net/pub/Releases/1.2.2/xcache-1.2.2.tar.gz
--------------------------------------------------------------------------------
二、安装PHP 5.2.6（FastCGI模式）
1、编译安装PHP 5.2.6所需的支持库：
tar zxvf libiconv-1.12.tar.gz
cd libiconv-1.12/
./configure --prefix=/usr/local
make
make install
cd ../
tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../
tar zxvf mhash-0.9.9.tar.gz
cd mhash-0.9.9/
./configure
make
make install
cd ../
cp /usr/local/lib/libmcrypt.* /usr/lib
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
tar zxvf mcrypt-2.6.7.tar.gz
cd mcrypt-2.6.7/
./configure
make
make install
cd ../
--------------------------------------------------------------------------------
2、编译安装MySQL 5.1.24-rc
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
tar zxvf mysql-5.1.24-rc.tar.gz
cd mysql-5.1.24-rc/
./configure --prefix=/usr/local/webserver/mysql/ --without-debug --with-unix-socket-path=/usr/local/webserver/mysql/mysql.sock --with-client-ldflags=-all-static --with-mysqld-ldflags=-all-static --enable-assembler --with-extra-charsets=gbk,gb2312,utf8 --with-pthread --enable-thread-safe-client
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cp support-files/my-medium.cnf /usr/local/webserver/mysql/my.cnf
cd ../
--------------------------------------------------------------------------------
附：以下为附加步骤，如果你想在这台服务器上运行MySQL数据库，则执行以下两步。如果你只是希望让PHP支持MySQL扩展库，能够连接其他服务器上的MySQL数据库，那么，以下两步无需执行。
①、以mysql用户帐号的身份建立数据表：
/usr/local/webserver/mysql/bin/mysql_install_db --defaults-file=/usr/local/webserver/mysql/my.cnf --basedir=/usr/local/webserver/mysql --datadir=/usr/local/webserver/mysql/data --user=mysql --pid-file=/usr/local/webserver/mysql/mysql.pid --skip-locking --port=3306 --socket=/tmp/mysql.sock
②、启动MySQL（最后的&表示在后台运行）
/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe --defaults-file=/usr/local/webserver/mysql/my.cnf &
--------------------------------------------------------------------------------
3、编译安装PHP（FastCGI模式）
tar zxvf php-5.2.6.tar.gz
gzip -cd php-5.2.6-fpm-0.5.8.diff.gz | patch -d php-5.2.6 -p1
cd php-5.2.6/
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql --with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-debug --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl
sed -i 's#-lz -lm -lxml2 -lz -lm -lxml2 -lz -lm -lcrypt#& -liconv#' Makefile
make
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../
--------------------------------------------------------------------------------
4、编译安装PHP5扩展模块
tar zxvf memcache-2.2.3.tgz
cd memcache-2.2.3/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../
tar zxvf xcache-1.2.2.tar.gz
cd xcache-1.2.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --enable-xcache
make
make install
cd ../
5、修改php.ini文件
手工修改：查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
修改为extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
并在此行后增加以下几行，然后保存：
extension = "memcache.so"
再查找display_errors = On
修改为display_errors = Off
自动修改：若嫌手工修改麻烦，可执行以下shell命令，自动完成对php.ini文件的修改：
sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"nextension = "memcache.so"n#' /usr/local/webserver/php/etc/php.ini
sed -i 's#display_errors = On#display_errors = Off#' /usr/local/webserver/php/etc/php.ini
6、配置XCache加速PHP：
vi /usr/local/webserver/php/etc/php.ini
按shift+g键跳到配置文件的最末尾，加上以下配置信息：
[xcache-common]
zend_extension = /usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/xcache.so
[xcache.admin]
xcache.admin.user = "xcache"
; xcache.admin.pass = md5($yourpasswd)
xcache.admin.pass = "8e6867a5d05144cf4761d6481fc674a8"
[xcache]
xcache.cacher = On
xcache.shm_scheme = "mmap"
xcache.size = 32M
; cpu number (cat /proc/cpuinfo |grep -c processor)
xcache.count = 2
xcache.slots = 8k
xcache.ttl = 0
xcache.gc_interval = 0
xcache.var_size = 2M
; cpu number (cat /proc/cpuinfo |grep -c processor)
xcache.var_count = 2
xcache.var_slots = 8K
xcache.var_ttl = 0
xcache.var_maxttl = 0
xcache.var_gc_interval = 300
xcache.readonly_protection = Off
xcache.mmap_path = "/dev/zero"
--------------------------------------------------------------------------------
7、创建www用户和组，以及供blog.s135.com和www.s135.com两个虚拟主机使用的目录：
/usr/sbin/groupadd www -g 48
/usr/sbin/useradd -u 48 -g www www
mkdir -p /data0/htdocs/blog
chmod +w /data0/htdocs/blog
chown -R www:www /data0/htdocs/blog
mkdir -p /data0/htdocs/www
chmod +w /data0/htdocs/www
chown -R www:www /data0/htdocs/www
8、创建php-fpm配置文件（php-fpm是为PHP打的一个FastCGI管理补丁，可以平滑变更php.ini配置而无需重启php-cgi）：
在/usr/local/webserver/php/etc/目录中创建php-fpm.conf文件：
rm -f /usr/local/webserver/php/etc/php-fpm.conf
vi /usr/local/webserver/php/etc/php-fpm.conf
输入以下内容：
<?xml version="1.0" ?>
<configuration>
All relative paths in this config are relative to php's install prefix
<section name="global_options">
Pid file
<value name="pid_file">/usr/local/webserver/php/logs/php-fpm.pid</value>
Error log file
<value name="error_log">/usr/local/webserver/php/logs/php-fpm.log</value>
Log level
<value name="log_level">notice</value>
When this amount of php processes exited with SIGSEGV or SIGBUS ...
<value name="emergency_restart_threshold">10</value>
... in a less than this interval of time, a graceful restart will be initiated.
Useful to work around accidental curruptions in accelerator's shared memory.
<value name="emergency_restart_interval">1m</value>
Time limit on waiting child's reaction on signals from master
<value name="process_control_timeout">5s</value>
Set to 'no' to debug fpm
<value name="daemonize">yes</value>
</section>
<workers>
<section name="pool">
Name of pool. Used in logs and stats.
<value name="name">default</value>
Address to accept fastcgi requests on.
Valid syntax is 'ip.ad.re.ss:port' or just 'port' or '/path/to/unix/socket'
<value name="listen_address">127.0.0.1:9000</value>
<value name="listen_options">
Set listen(2) backlog
<value name="backlog">-1</value>
Set permissions for unix socket, if one used.
In Linux read/write permissions must be set in order to allow connections from web server.
Many BSD-derrived systems allow connections regardless of permissions.
<value name="owner"></value>
<value name="group"></value>
<value name="mode">0666</value>
</value>
Additional php.ini defines, specific to this pool of workers.
<value name="php_defines">
<value name="sendmail_path">/usr/sbin/sendmail -t -i</value>
<value name="display_errors">0</value>
</value>
Unix user of processes
<value name="user">www</value>
Unix group of processes
<value name="group">www</value>
Process manager settings
<value name="pm">
Sets style of controling worker process count.
Valid values are 'static' and 'apache-like'
<value name="style">static</value>
Sets the limit on the number of simultaneous requests that will be served.
Equivalent to Apache MaxClients directive.
Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
Used with any pm_style.
<value name="max_children">128</value>
Settings group for 'apache-like' pm style
<value name="apache_like">
Sets the number of server processes created on startup.
Used only when 'apache-like' pm_style is selected
<value name="StartServers">20</value>
Sets the desired minimum number of idle server processes.
Used only when 'apache-like' pm_style is selected
<value name="MinSpareServers">5</value>
Sets the desired maximum number of idle server processes.
Used only when 'apache-like' pm_style is selected
<value name="MaxSpareServers">250</value>
</value>
</value>
Time limit on waiting execution of single request
Should be used when 'max_execution_time' ini option does not terminate execution for some reason
<value name="request_execution_timeout">31s</value>
Set open file desc rlimit
<value name="rlimit_files">51200</value>
Set max core size rlimit
<value name="rlimit_core">0</value>
Chroot to this directory at the start
<value name="chroot"></value>
Chdir to this directory at the start
<value name="chdir"></value>
Redirect workers' stdout and stderr into main error log.
If not set, they will be redirected to /dev/null, according to FastCGI specs
<value name="catch_workers_output">yes</value>
How much requests each process should execute before respawn.
Useful to work around memory leaks in 3rd party libraries.
For endless request processing please specify 0
Equivalent to PHP_FCGI_MAX_REQUESTS
<value name="max_requests">51200</value>
Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.
Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)
Makes sense only with AF_INET listening socket.
<value name="allowed_clients">127.0.0.1</value>
Pass environment variables like LD_LIBRARY_PATH
All $VARIABLEs are taken from current environment
<value name="environment">
<value name="HOSTNAME">$HOSTNAME</value>
<value name="PATH">/usr/local/bin:/usr/bin:/bin</value>
<value name="TMP">/tmp</value>
<value name="TMPDIR">/tmp</value>
<value name="TEMP">/tmp</value>
<value name="OSTYPE">$OSTYPE</value>
<value name="MACHTYPE">$MACHTYPE</value>
<value name="MALLOC_CHECK_">2</value>
</value>
</section>
</workers>
</configuration>
Nginx 的中文维基：http://wiki.codemongers.com/NginxChs
在高并发连接的情况下，Nginx是Apache服务器不错的替代品。Nginx同时也可以作为7层负载均衡服务器来使用。根据我的测试结果，Nginx 0.6.31 + PHP 5.2.6 (FastCGI) 可以承受3万以上的并发连接数，相当于同等环境下Apache的10倍。
根据我的经验，4GB内存的服务器+Apache（prefork模式）一般只能处理3000个并发连接，因为它们将占用3GB以上的内存，还得为系统预留1GB的内存。我曾经就有两台Apache服务器，因为在配置文件中设置的MaxClients为4000，当Apache并发连接数达到3800 时，导致服务器内存和Swap空间用满而崩溃。
而这台 Nginx 0.6.31 + PHP 5.2.6 (FastCGI) 服务器在3万并发连接下，开启的10个Nginx进程消耗150M内存（15M*10=150M），开启的64个php-cgi进程消耗1280M内存（20M*64=1280M），加上系统自身消耗的内存，总共消耗不到2GB内存。如果服务器内存较小，完全可以只开启25个php-cgi进程，这样 php-cgi消耗的总内存数才500M。
在3万并发连接下，访问Nginx 0.6.31 + PHP 5.2.6 (FastCGI) 服务器的PHP程序，仍然速度飞快。下图为Nginx的状态监控页面，显示的活动连接数为28457（关于Nginx的监控页配置，会在本文接下来所给出的Nginx配置文件中写明）：
图片 alt=点击在新窗口中浏览此图片 src="http://www.phpv.net/uploadfile/month_200806/local_kL6XBv8Yq1.png" border=0>
我生产环境下的两台Nginx + PHP5（FastCGI）服务器，跑多个一般复杂的纯PHP动态程序，单台Nginx + PHP5（FastCGI）服务器跑PHP动态程序的处理能力已经超过“700次请求/秒”，相当于每天可以承受6000万（700*60*60*24=60480000）的访问量（更多信息见此），而服务器的系统负载也不算高：
--------------------------------------------------------------------------------
安装步骤：
（系统要求：Linux 2.6+ 内核，本文中的Linux操作系统为CentOS 5.1，另在RedHat AS4上也安装成功）
一、获取相关开源程序：
1、利用CentOS Linux系统自带的yum命令安装、升级所需的程序库（RedHat等其他Linux发行版可从安装光盘中找到这些程序库的RPM包，进行安装）：
sudo -s
LANG=C
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libpng libpng-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel
2、下载程序源码包：
本文中提到的所有开源软件为截止到2008年6月5日的最新稳定版。
mkdir -p /data0/software
cd /data0/software
wget http://sysoev.ru/nginx/nginx-0.6.31.tar.gz
wget http://www.php.net/get/php-5.2.6.tar.gz/from/this/mirror
wget http://php-fpm.anight.org/downlo ... 6-fpm-0.5.8.diff.gz
wget http://dev.mysql.com/get/Downloa ... //mysql.ntu.edu.tw/
wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.12.tar.gz
wget "http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz?modtime=1171868460&big_mirror=0"
wget "http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.7.tar.gz?modtime=1194463373&big_mirror=0"
wget http://pecl.php.net/get/memcache-2.2.3.tgz
wget "http://downloads.sourceforge.net/mhash/mhash-0.9.9.tar.gz?modtime=1175740843&big_mirror=0"
wget ftp://ftp.csx.cam.ac.uk/pub/soft ... cre/pcre-7.7.tar.gz
wget http://xcache.lighttpd.net/pub/Releases/1.2.2/xcache-1.2.2.tar.gz
--------------------------------------------------------------------------------
二、安装PHP 5.2.6（FastCGI模式）
1、编译安装PHP 5.2.6所需的支持库：
tar zxvf libiconv-1.12.tar.gz
cd libiconv-1.12/
./configure --prefix=/usr/local
make
make install
cd ../
tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../
tar zxvf mhash-0.9.9.tar.gz
cd mhash-0.9.9/
./configure
make
make install
cd ../
cp /usr/local/lib/libmcrypt.* /usr/lib
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
tar zxvf mcrypt-2.6.7.tar.gz
cd mcrypt-2.6.7/
./configure
make
make install
cd ../
--------------------------------------------------------------------------------
2、编译安装MySQL 5.1.24-rc
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
tar zxvf mysql-5.1.24-rc.tar.gz
cd mysql-5.1.24-rc/
./configure --prefix=/usr/local/webserver/mysql/ --without-debug --with-unix-socket-path=/usr/local/webserver/mysql/mysql.sock --with-client-ldflags=-all-static --with-mysqld-ldflags=-all-static --enable-assembler --with-extra-charsets=gbk,gb2312,utf8 --with-pthread --enable-thread-safe-client
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cp support-files/my-medium.cnf /usr/local/webserver/mysql/my.cnf
cd ../
--------------------------------------------------------------------------------
附：以下为附加步骤，如果你想在这台服务器上运行MySQL数据库，则执行以下两步。如果你只是希望让PHP支持MySQL扩展库，能够连接其他服务器上的MySQL数据库，那么，以下两步无需执行。
①、以mysql用户帐号的身份建立数据表：
/usr/local/webserver/mysql/bin/mysql_install_db --defaults-file=/usr/local/webserver/mysql/my.cnf --basedir=/usr/local/webserver/mysql --datadir=/usr/local/webserver/mysql/data --user=mysql --pid-file=/usr/local/webserver/mysql/mysql.pid --skip-locking --port=3306 --socket=/tmp/mysql.sock
②、启动MySQL（最后的&表示在后台运行）
/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe --defaults-file=/usr/local/webserver/mysql/my.cnf &
--------------------------------------------------------------------------------
3、编译安装PHP（FastCGI模式）
tar zxvf php-5.2.6.tar.gz
gzip -cd php-5.2.6-fpm-0.5.8.diff.gz | patch -d php-5.2.6 -p1
cd php-5.2.6/
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql --with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-debug --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl
sed -i 's#-lz -lm -lxml2 -lz -lm -lxml2 -lz -lm -lcrypt#& -liconv#' Makefile
make
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../
--------------------------------------------------------------------------------
4、编译安装PHP5扩展模块
tar zxvf memcache-2.2.3.tgz
cd memcache-2.2.3/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../
tar zxvf xcache-1.2.2.tar.gz
cd xcache-1.2.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --enable-xcache
make
make install
cd ../
5、修改php.ini文件
手工修改：查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
修改为extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
并在此行后增加以下几行，然后保存：
extension = "memcache.so"
再查找display_errors = On
修改为display_errors = Off
自动修改：若嫌手工修改麻烦，可执行以下shell命令，自动完成对php.ini文件的修改：
sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"nextension = "memcache.so"n#' /usr/local/webserver/php/etc/php.ini
sed -i 's#display_errors = On#display_errors = Off#' /usr/local/webserver/php/etc/php.ini
6、配置XCache加速PHP：
vi /usr/local/webserver/php/etc/php.ini
按shift+g键跳到配置文件的最末尾，加上以下配置信息：
[xcache-common]
zend_extension = /usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/xcache.so
[xcache.admin]
xcache.admin.user = "xcache"
; xcache.admin.pass = md5($yourpasswd)
xcache.admin.pass = "8e6867a5d05144cf4761d6481fc674a8"
[xcache]
xcache.cacher = On
xcache.shm_scheme = "mmap"
xcache.size = 32M
; cpu number (cat /proc/cpuinfo |grep -c processor)
xcache.count = 2
xcache.slots = 8k
xcache.ttl = 0
xcache.gc_interval = 0
xcache.var_size = 2M
; cpu number (cat /proc/cpuinfo |grep -c processor)
xcache.var_count = 2
xcache.var_slots = 8K
xcache.var_ttl = 0
xcache.var_maxttl = 0
xcache.var_gc_interval = 300
xcache.readonly_protection = Off
xcache.mmap_path = "/dev/zero"
--------------------------------------------------------------------------------
7、创建www用户和组，以及供blog.s135.com和www.s135.com两个虚拟主机使用的目录：
/usr/sbin/groupadd www -g 48
/usr/sbin/useradd -u 48 -g www www
mkdir -p /data0/htdocs/blog
chmod +w /data0/htdocs/blog
chown -R www:www /data0/htdocs/blog
mkdir -p /data0/htdocs/www
chmod +w /data0/htdocs/www
chown -R www:www /data0/htdocs/www
8、创建php-fpm配置文件（php-fpm是为PHP打的一个FastCGI管理补丁，可以平滑变更php.ini配置而无需重启php-cgi）：
在/usr/local/webserver/php/etc/目录中创建php-fpm.conf文件：
rm -f /usr/local/webserver/php/etc/php-fpm.conf
vi /usr/local/webserver/php/etc/php-fpm.conf
输入以下内容：
<?xml version="1.0" ?>
<configuration>
All relative paths in this config are relative to php's install prefix
<section name="global_options">
Pid file
<value name="pid_file">/usr/local/webserver/php/logs/php-fpm.pid</value>
Error log file
<value name="error_log">/usr/local/webserver/php/logs/php-fpm.log</value>
Log level
<value name="log_level">notice</value>
When this amount of php processes exited with SIGSEGV or SIGBUS ...
<value name="emergency_restart_threshold">10</value>
... in a less than this interval of time, a graceful restart will be initiated.
Useful to work around accidental curruptions in accelerator's shared memory.
<value name="emergency_restart_interval">1m</value>
Time limit on waiting child's reaction on signals from master
<value name="process_control_timeout">5s</value>
Set to 'no' to debug fpm
<value name="daemonize">yes</value>
</section>
<workers>
<section name="pool">
Name of pool. Used in logs and stats.
<value name="name">default</value>
Address to accept fastcgi requests on.
Valid syntax is 'ip.ad.re.ss:port' or just 'port' or '/path/to/unix/socket'
<value name="listen_address">127.0.0.1:9000</value>
<value name="listen_options">
Set listen(2) backlog
<value name="backlog">-1</value>
Set permissions for unix socket, if one used.
In Linux read/write permissions must be set in order to allow connections from web server.
Many BSD-derrived systems allow connections regardless of permissions.
<value name="owner"></value>
<value name="group"></value>
<value name="mode">0666</value>
</value>
Additional php.ini defines, specific to this pool of workers.
<value name="php_defines">
<value name="sendmail_path">/usr/sbin/sendmail -t -i</value>
<value name="display_errors">0</value>
</value>
Unix user of processes
<value name="user">www</value>
Unix group of processes
<value name="group">www</value>
Process manager settings
<value name="pm">
Sets style of controling worker process count.
Valid values are 'static' and 'apache-like'
<value name="style">static</value>
Sets the limit on the number of simultaneous requests that will be served.
Equivalent to Apache MaxClients directive.
Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
Used with any pm_style.
<value name="max_children">128</value>
Settings group for 'apache-like' pm style
<value name="apache_like">
Sets the number of server processes created on startup.
Used only when 'apache-like' pm_style is selected
<value name="StartServers">20</value>
Sets the desired minimum number of idle server processes.
Used only when 'apache-like' pm_style is selected
<value name="MinSpareServers">5</value>
Sets the desired maximum number of idle server processes.
Used only when 'apache-like' pm_style is selected
<value name="MaxSpareServers">250</value>
</value>
</value>
Time limit on waiting execution of single request
Should be used when 'max_execution_time' ini option does not terminate execution for some reason
<value name="request_execution_timeout">31s</value>
Set open file desc rlimit
<value name="rlimit_files">51200</value>
Set max core size rlimit
<value name="rlimit_core">0</value>
Chroot to this directory at the start
<value name="chroot"></value>
Chdir to this directory at the start
<value name="chdir"></value>
Redirect workers' stdout and stderr into main error log.
If not set, they will be redirected to /dev/null, according to FastCGI specs
<value name="catch_workers_output">yes</value>
How much requests each process should execute before respawn.
Useful to work around memory leaks in 3rd party libraries.
For endless request processing please specify 0
Equivalent to PHP_FCGI_MAX_REQUESTS
<value name="max_requests">51200</value>
Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.
Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)
Makes sense only with AF_INET listening socket.
<value name="allowed_clients">127.0.0.1</value>
Pass environment variables like LD_LIBRARY_PATH
All $VARIABLEs are taken from current environment
<value name="environment">
<value name="HOSTNAME">$HOSTNAME</value>
<value name="PATH">/usr/local/bin:/usr/bin:/bin</value>
<value name="TMP">/tmp</value>
<value name="TMPDIR">/tmp</value>
<value name="TEMP">/tmp</value>
<value name="OSTYPE">$OSTYPE</value>
<value name="MACHTYPE">$MACHTYPE</value>
<value name="MALLOC_CHECK_">2</value>
</value>
</section>
</workers>
</configuration>