Zabbix agent 在windows平台上的安装

tznktg

zabbix是一个CS结构的监控系统，server端侦听在10051端口，客户端侦听在10050端口。用户界面使用php开发。



1. 配置zabbix_agentd.conf文件，需要修改的地方分别为：Server，Hostname，LogFile，其中Server是zabbix服务器的IP地址，Hostname是本地的主机名，LogFile为zabbix_agentd.log文件的位置，用于记录事件，这里的zabbix_agentd.log填写你新建log文件的位置。

2. 新建一个zabbix_agent.log文件。

3. 进入DOS环境，执行C:\win32\zabbix_agentd.exe --install，此处的路径是zabbix_agentd.exe的路径。这里要求zabbix_agentd.conf必须在c:\目录下。如果zabbix_agentd.conf不在根目录下，则必须使用config参数，具体如下：c:\win32\zabbix_agentd.exe --config <zabbix_agentd.conf的目录> install 。

4. 在"运行"输入 "services.msc"，在里面找到"ZABBIX AGENT"，并启动服务。


至此就完成了ZABBIX windows  agent的安装和配置。


ps：如果本机有防火墙的话，请关闭，否则可能配置不成功,或者把zabbix所用到的端口打开！

下载地址:http://www.zabbix.com

下面贴出zabbix_agentd.conf 文件的内容：

# This is config file for zabbix_agentd
# To get more information about ZABBIX, go http://www.zabbix.com

############ GENERAL PARAMETERS #################

# List of comma delimited IP addresses (or hostnames) of ZABBIX servers.
# No spaces allowed. First entry is used for sending active checks.
# Note that hostnames must resolve hostname->IP address and
# IP address->hostname.

Server=192.168.0.21

# Server port for sending active checks

#ServerPort=10051

# Unique hostname. Required for active checks.

Hostname=paulo

# Listen port. Default is 10050

#ListenPort=10050

# IP address to bind agent
# If missing, bind to all available IPs

#ListenIP=127.0.0.1

# Number of pre-forked instances of zabbix_agentd.
# Default value is 5
# This parameter must be between 1 and 16

StartAgents=5

# How often refresh list of active checks. 2 minutes by default.

#RefreshActiveChecks=120

# Disable active checks. The agent will work in passive mode listening server.

#DisableActive=1

# Enable remote commands for ZABBIX agent. By default remote commands disabled.

#EnableRemoteCommands=1

# Specifies debug level
# 0 - debug is not created
# 1 - critical information
# 2 - error information
# 3 - warnings (default)
# 4 - for debugging (produces lots of information)

DebugLevel=3

# Name of PID file

#PidFile=/var/tmp/zabbix_agentd.pid

# Name of log file.
# If not set, syslog will be used

LogFile=E:/Project/Zabbix/bin/zabbix_agentd.log

# Maximum size of log file in MB. Set to 0 to disable automatic log rotation.
#LogFileSize=1

# Spend no more than Timeout seconds on processing
# Must be between 1 and 30

Timeout=3

####### USER-DEFINED MONITORED PARAMETERS #######
# Format: UserParameter=<key>,<shell command>
# Note that shell command must not return empty string or EOL only
#UserParameter=system.test,who|wc -l
### Set of parameter for monitoring MySQL server (v3.23.42 and later)
### Change -u<username> and add -p<password> if required
#UserParameter=mysql.ping,mysqladmin -uroot ping|grep alive|wc -l
#UserParameter=mysql.uptime,mysqladmin -uroot status|cut -f2 -d":"|cut -f1 -d"T"
#UserParameter=mysql.threads,mysqladmin -uroot status|cut -f3 -d":"|cut -f1 -d"Q"
#UserParameter=mysql.questions,mysqladmin -uroot status|cut -f4 -d":"|cut -f1 -d"S"
#UserParameter=mysql.slowqueries,mysqladmin -uroot status|cut -f5 -d":"|cut -f1 -d"O"
#UserParameter=mysql.qps,mysqladmin -uroot status|cut -f9 -d":"
#UserParameter=mysql.version,mysql -V